|
|
|
Inverted arcs (filaments pointed inward) and external arcs (filaments
pointed out) are available with and without brush holders.
Channel sizes include A, B, C, D, F, G and K and are available
in galvanized and stainless steels. Minimum arc outside radius
(OR) or inside radius (IR) depends on channel size and channel
material as shown below. A wide range of synthetic, natural
and metal filaments are available.
If your application requires an arc form with diameter and radius
less than those shown, contact a Sealeze Sales Representative for
more information.
 |
 |
 |
| |
Ez-Flex
Strip Brush is available as an alternative to metal
back brush. It's great for use around curves and
in-field installation. Click
here for more information. |
|
 |
|
 |
To
e-mail us your application information, click here.
Or, call 1-800-787-7325 or 1-804-743-0982 |
|
Inverted
Arcs |
 |
| Channel
Section Size |
Section
Size |
(X)
Width
(inches) |
(Y)
Height
(inches) |
 |
| A |
0.095 |
0.110 |
| B |
0.150 |
0.152 |
| C |
0.180 |
0.199 |
| D |
0.240 |
0.256 |
| F |
0.313 |
0.313 |
| G |
0.350 |
0.370 |
| K |
0.500 |
0.500 |
|
| MINIMUM
OR (inches) FOR INVERTED ARCS |
| Section |
Product
Code* |
Galvanized
Channel |
Stainless
Channel |
Stainless
Filament |
| A |
IAA1 |
0.313 |
0.500 |
On
Application |
| B |
IAB1 |
0.656 |
1.250 |
1.250 |
| C |
IAC1 |
1.094 |
1.875 |
2.125 |
| D |
IAD1 |
1.425 |
2.125 |
2.375 |
| F |
IAF1 |
1.750 |
2.625 |
2.875 |
| G |
IAG1 |
2.000 |
3.000 |
3.250 |
| K |
IAK1 |
4.000 |
5.000 |
7.000 |
| *T-304
S/S Channel change "1" to "2".
T-316L Channel change "1" to "6". |
Click here to
download a worksheet for Inverted Arc (pdf)
Or, click here for the On-Line Worksheet
| MINIMUM
OR (inches) FOR INVERTED ARCS with Formed Aluminum
Holders |
| Section |
Product
Code* |
Straight
Flange |
Right-Angle
Flange |
Angled
Holders |
| A |
IAA1 |
2.500 |
2.000 |
On
Application |
| B |
IAB1 |
3.000 |
2.500 |
On
Application |
| C |
IAC1 |
3.500 |
3.000 |
On
Application |
| D |
IAD1 |
3.750 |
3.250 |
On
Application |
| F |
IAF1 |
On
Application |
On
Application |
On
Application |
| G |
IAG1 |
5.000 |
4.000 |
On
Application |
| *T-304
S/S Channel change "1" to "2".
T-316L Channel change "1" to "6". |
Click here to
download a worksheet for Inverted Arc with Formed Aluminum Holder
(pdf)
Or, click here for the On-Line Worksheet |
External
Arcs |
 |
| Channel
Section Size |
Section
Size |
(X)
Width
(inches) |
(Y)
Height
(inches) |
|
| A |
0.095 |
0.110 |
| B |
0.150 |
0.152 |
| C |
0.180 |
0.199 |
| D |
0.256 |
0.256 |
| F |
0.313 |
0.313 |
| G |
0.350 |
0.370 |
| K |
0.500 |
0.500 |
|
| MINIMUM
IR (inches) FOR EXTERNAL ARCS |
| Section |
Product
Code* |
Galvanized
Channel |
Stainless
Channel |
Stainless
Filament |
| A |
EAA1 |
0.375 |
0.750 |
On
Application |
| B |
EAB1 |
0.500 |
1.000 |
1.000 |
| C |
EAC1 |
0.625 |
1.125 |
1.375 |
| D |
EAD1 |
0.750 |
1.250 |
1.500 |
| F |
EAF1 |
0.900 |
1.400 |
1.650 |
| G |
EAG1 |
1.000 |
1.500 |
1.750 |
| K |
EAK1 |
2.000 |
2.750 |
3.500 |
| *T-304
S/S Channel change "1" to "2".
T-316L Channel change "1" to "6". |
Click here to
download a worksheet for External Arc (pdf)
Or, click here for the On-Line Worksheet
| MINIMUM
OR (inches) FOR Inverted/External Arc ASSEMBLIES
with Formed Aluminum Holders |
| Section |
Product
Code* |
Straight
Flange |
Right-Angle
Flange |
Angled
Holders |
| A |
IAA1 |
2.500 |
2.000 |
On
Application |
| B |
IAB1 |
3.000 |
2.500 |
On
Application |
| C |
IAC1 |
3.500 |
3.000 |
On
Application |
| D |
IAD1 |
3.750 |
3.250 |
On
Application |
| F |
IAF1 |
On
Application |
On
Application |
On
Application |
| G |
IAG1 |
5.000 |
4.000 |
On
Application |
| *T-304
S/S Channel change "1" to "2".
T-316L Channel change "1" to "6". |
Click here to
download a worksheet for Inverted/External Arc Assemblies (pdf)
Or, click here for the On-Line Worksheet |
| |
|
